User's Manual

iHelmet Hair Growth System (Model: LTD160Pro) User Manual V1.0
24
/
27
The iHelmet (Model: LTD88Lite, LTD36Air, LTD160Pro) is intended for use in the
electromagnetic environment specified below. The customer or the user of the iHelmet (Model:
LTD88Lite, LTD36Air, LTD160Pro) should assure that it is used in such an environment.
Emissions
Compliance
Electromagnetic environment-- guidance
RF emissions
CISPR 11
Group 1
The iHelmet (Model: LTD88Lite, LTD36Air,
LTD160Pro) uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The iHelmet (Model: LTD88Lite, LTD36Air,
LTD160Pro) is suitable for use in all
establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Not Applicable
Guidance and manufacturer’s declaration – electromagnetic immunity
The iHelmet (Model: LTD88Lite, LTD36Air, LTD160Pro) is intended for use in the
electromagnetic environment specified below. The customer or the user of the iHelmet (Model:
LTD88Lite, LTD36Air, LTD160Pro) should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance level
Electromagnetic environment
--guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-2
±8 kV contact
±15 kV air
±8 kV contact
±15 kV air
Floors should be wood,
concrete or ceramic tile. If floors
are covered with synthetic
material, the relative humidity
should be at least 30 %.
Electrical fast
transient/burst
IEC 61000-4-4
±2 kV for power
supply lines
±1 kV for
input/output lines
Not Applicable
Mains power quality should be
that of a typical commercial or
hospital environment or typical
home environment
Surge
± 1 kV line(s) and
Not Applicable
Mains power quality should be