User's Manual

iHelmet Hair Growth System (Model: LTD160Pro) User Manual V1.0
26
/
27
Radiated RF
IEC
61000-4-3
10 V/m
80 MHz to
2.6GHz
10 V/m
80 MHz to
2.6GHz
calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer
and d is the recommended separation
Distance in meters (m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey,
a
should be less than the compliance
level in each frequency range.
b
Interference may occur in the vicinity of
Equipment marked with the following
symbol:
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which the iHelmet (Model:
LTD88Lite, LTD36Air, LTD160Pro) is used exceeds the applicable RF compliance level above,
the iHelmet (Model: LTD88Lite, LTD36Air, LTD160Pro) should be observed to verify normal
operation. If abnormal performance is observed, additional measures may be necessary, such
as re-orienting or relocating the iHelmet (Model: LTD88Lite, LTD36Air, LTD160Pro).
b. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 10 V/m.