User's Manual

iHelmet Hair Growth System (Model: LTD160Pro) User Manual V1.0
8
/
27
Fitzpatrick Classification of Skin Types
3 Device Description
IHelmet Hair Growth System consists of laser diodes that are spread throughout the helmet.
The device uses diode lasers to cover the entire area of the head that is normally covered with
hair, and this unique design allows the treatment of the entire scalp without manual movement.
The device will pause automatically treatment if the sensor detects that the head is not in close
proximity to the sensor, and will resume again once close enough. At the end of the treatment,
an audible tone beeps to indicate the treatment is over and then the iHelmet automatically shut
off.
3.1 Specification
Devices Name
iHelmet Hair Growth System
Model
LTD160Pro
Electrical Requirement
Power Supply
Internal lithium battery: 3.7Vdc, 3000mAh
Charging by specified power adaptor: 5Vdc, 2A max.
Continue Operating Hours
The battery can continuously operate 1 hour maximum
after full charge.
Typical Operation Time
The device uses high quality laser diodes and LED’s
that are rated to exceed 10,000 hours of usage.
Output Specification
Waveform
Visible red laser
Wavelength
650nm±10nm
Amounts of Laser Diodes
LTD88Lite: 88
LTD36Air: 36
LTD160Pro: 160
Energy of per Laser
4~5mW
Classification according to
IEC60825-1
Class 3R
Beam Divergence
Parallel: 10±2°
Perpendicular: 19±4°