Instructions / Assembly

9b) Repeat these steps to secure and stack all boards into the panels in each fence
line of your project making sure the stacks of boards are remaining level as you slip
in boards.
10) Once all the boards have been inserted and the fence looks complete, you can
now trim the tops of the posts if necessary with a metal blade on your saw.
15) Then tap on the “self tightening” Aluminum Post cap with rubber mallet to all
Posts.
Post caps should sit approximately 2” above the top of the fence boards for a nice
clean look. Posts can be easily cut down with a metal blade on your saw if necessary.
Gates can be added anywhere in the TAHOE Slip Fence provided the gate hardware
can fasten to a 3” Square Aluminum Fencepost. SLIPFENCE horizontal gate Kits are
available to easily construct a gate right on site.
What you have now is a warm and private wooden fence with the strength and
endurance of an aluminum Fence
Build a Better Fence …
SLIPFENCE