Instructions / Assembly

NOTES
Middle Brackets will have two short carriage bolts and grip nuts to hold the bracket
onto the post temporarily until the Stringer has been placed on and leveled.
TIPS
Make sure that the dome side of your carriage bolt that are inserted at this stage are on all
on the same side of the fence for all posts. This will be the side of the fence that will have
the ripped half board on either end of the fence section.
STEP 8 – Install Stringers onto Brackets
Place the Stringers “U” shape down onto the bracket seats making sure the board holes in
both top and bottom stringers are aligned. Insert the Longest Carriage Bolts through the top
of the stinger and the bracket oval opening and tighten the bottom nut.