Installation Guide

HOW TO INSTALL BATHTUB STRIPS & TUB TATTOOS

Unlike our non-slip bath mats, which use suction cups, our bathtub strips,

appliques and Tub Tattoos use a strong adhesive in order to provide reliable

slip-resistance in the tub or shower. Please review these instructions carefully

to ensure maximum contact between the adhesive and the surface.

1. CLEAN & PREPARE THE SURFACE

Ensure all residue and mineral build-up are removed from the target

surface by completing these steps in order:

 Clean the surface with your regular, household cleaner.

 Dry completely.

 Apply rubbing alcohol to desired surface.

 Dry completely. You’re ready to install!

2. INSTALLATION PROCEDURE

 Pick your desired layout.

 Peel the backing off the first Tub Tattoo.

 Press tub tread against surface working your way outward,

eliminating any air bubbles.

 Wait 4 hours minimum before getting the tub appliques wet. If

possible, we recommend waiting 24 hours.

Questions on your Safety Treads? Visit www.slipxsolutions.com or call 1-800-

968-0104.

PAGE 1
HOW TO INSTALL BATHTUB STRIPS & TUB TATTOOS Unlike our non-slip bath mats, which use suction cups, our bathtub strips, appliques and Tub Tattoos use a strong adhesive in order to provide reliable slip-resistance in the tub or shower. Please review these instructions carefully to ensure maximum contact between the adhesive and the surface. 1. CLEAN & PREPARE THE SURFACE Ensure all residue and mineral build-up are removed from the target surface by completing these steps in order:     2.