Specification Sheet

DESCRIPTION
Complete HEU system with exposed, battery powered, sensor
activated, Royal
®
OPTIMA Plus
®
SMOOTH
®
urinal Flushometer
and vitreous china urinal fixture.
Flush Cycle
Model WEUS 1002.1403-0.25 SMOOTH (0.25 gpf/ 0.9 Lpf)
Code: 10021403
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
SPECIFICATIONS
(CONTINUED)
Fixture
Wall hung vitreous china
Washdown flushing action
Vandal resistant strainer assembly included
¾” I.P.S. top spud inlet
2” NPT outlet flange
All mounting hardware included
Integral flushing rim
100 % factory flush tested
Compliant to the applicable sections
of ASME A112.19.2/CSA B45.1
Carrier not included
FEATURES
Automatic
Sloan SMOOTH
®
equipped Flushometers provide the
ultimate in sanitary protection and automatic operation.
There is no need for AC hookups or wall alterations.
The Flushometer operates by means of a battery
powered infrared sensor. True mechanical manual over-
ride button enables the Flushometer to work in the
event of a power failure. State-of-the-art technology
enables activation of a manual override without “double
flushing” occurring as the user departs (locks out
sensor for approximately 10 seconds).
Hygienic
The Royal
®
OPTIMA
®
SMOOTH
®
Flushometer System
is the next advancement in hygiene. User makes no
physical contact with the Flushometer surface except
to initiate the Mechanical Manual Override Flush
Handle when required. Helps control the spread of
infectious diseases.
Economical
Sloan installed batteries speed installation and provide
years of metered flushing to control the use of water
and energy. Batteries can be changed without turning
off the water.
Warranty
3 year (limited)
The information contained in this document is subject to change without notice.
Sloan Valve Company
10500 Seymour Avenue
Franklin Park, IL 60131
Phone: 1-800-9-VALVE-9 (982-5839)
or 1-847-671-4300
Fax: 1-800-447-8329 or 1-847-671-4380
www.sloanvalve.com
Copyright © 2013 Sloan Valve Company
WEUS-1002.1403 11-13
SPECIFICATIONS
Quiet, exposed, diaphragm type, chrome plated urinal
Flushometer and vitreous china urinal with the
following features:
Flushometer
PERMEX
®
Synthetic Rubber Diaphragm with
Dual Bypass
ADA compliant metal oscillating Non-Hold-Open
Handle with Triple Seal Handle Packing
¾” I.P.S. Screwdriver Bak-Chek
®
Angle Stop
High Back Pressure Vacuum Breaker Flush
Connection with One-piece Bottom Hex Coupling Nut
Spud Coupling and Flange for 3/4” Top Spud
Sweat Solder Adapter w/Cover Tube and Cast
Wall Flange w/Set Screw
High copper, low zinc brass castings for
dezincification resistance
Non-Hold-Open Handle, Fixed Metering Bypass
and no external volume adjustment to ensure
water conservation
Flush accuracy controlled by CID
®
technology
Diaphragm, Handle Packing, Stop Seat and
Vacuum Breaker molded from PERMEX
®
rubber
compound for chloramine resistance
Valve Body, Cover, Tailpiece and Control Stop shall
be in conformance with ASTM Alloy Classification
for Semi-Red Brass. Valve shall be in compliance
to the applicable sections of ASSE 1037/ ASME
A112.19.2/CSA B45.1
OPTIMA Plus
®
SMOOTH
®
Unit
ADA compliant OPTIMA Plus
®
SMOOTH
®
battery
powered infrared sensor for automatic “Hands-free”
operation
Sensor with automatic range adjustment
Chrome plated metal sensor housing
Mechanical Manual Override Flush Handle
Four (4) size C batteries included
“Low Battery” flashing LED
“User in View” flashing LED
25 to 80 psi operating range
Vandal resistant 1/8" ball-type hex key included
NOTE
: Plumbing System Requirements
√ Minimum
Flowing
Pressure: 25 PSI
√ Maximum Fixture Static Pressure: 80 PSI
Meets the American Disabilities Guidelines
and ANSI A117.1 requirements when
installed according to these requirements.
Model
WEUS-1002.1403-0.25 SMOOTH
OPTIMA Plus
®
Systems Sensor Activated HEU Flushometer and HEU Urinal Fixture
Efficiency Series

Summary of content (2 pages)