Installation Guide

2
Model 122
LIVE TEXT
†
†
†
†
†
Model 122
LIVE TEXT
†
†
†
†
†
Model 122
LIVE TEXT
†
†
†
†
†
Model 122
LIVE TEXT
†
†
†
†
†
Model 122
LIVE TEXT
†
†
†
†
†
Model 122
LIVE TEXT
†
†
†
†
†
MODELS 110/111
MODELS 113, 115 & 116
MODEL 117 MODELS 120/122
MODEL 180 MODEL 186
NOTE: Model 180
requires 1” I.P.S.
(DN 25 mm) Supply
IMPORTANT NOTES:
• When mounted on an ADA accessible bowl, the rough-in to the supply inlet should be no higher than 37½” or the handle will exceed maximum height allowances under ADA guidelines.
• New ADAAG Guidelines allow for Split or Offset Grab Bars, check with local authorities or reference section 604.5.2 of ADAAG.
† 1” Control Stop is available with Whitworth Thread
NOTE: Water Closet
Valves with “-2.4”
Model Designation
deliver 2.4 gpf (9.0 Lpf)
VALVE ROUGH-INS