Spec Sheet

WATER CLOSET & FLUSHOMETER COMBO
WETS-2002.1002-CO
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: [phone] • Fax: [phone] • sloan.com
Code 20021002T • Downloaded 07/02/21 • 06/30/20 • View Latest Version
Page 1 of 2
CODE NUMBER
20021002T
DESCRIPTION
Carbon Offset, ST-2009 Water Closet and WES 111 Flushometer.
COMPONENTS
Flushometer: Code 3720000
Water Closet: Code 2102009
DETAILS
Flush Volume: 1.6/1.1 gpf (6.0/4.2 Lpf)
Nominal Dimensions: 26 ¾" × 14" × 15" (679 × 356 × 381mm)
FLUSHOMETER FEATURES
Lifting Handle UP initiates reduced flush (1.1 gpf/4.2 Lpf),
eliminating liquid and paper waste, saving a 1⁄2-gallon of water
Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf),
eliminating all waste
Reduces water volume by up to 30% when activated UPWARDS
PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed
Bypass
ADA Metal Non-Hold-Open Handle with Triple Seal Handle Packing
Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set
Screw
Non-Hold-Open Handle, Fixed Metering Bypass and No External
Volume Adjustment to Ensure Water Conservation
Diaphragm, Handle Packing and Vacuum Breaker to be molded
from PERMEX® Rubber Compound for Chloramine Resistance
Includes two (2) adhesive backed Metal Wall Plates etched with
Instructions
FIXTURE FEATURES
White Vitreous China
Elongated bowl
Floor mounted, floor outlet
Siphon jet flushing action achieves 1000g Map score when used
with any Sloan flushometer
Water spot area: 10⅛" x 9⅜" (26 cm x 24 cm)
1½" I.P.S. top spud inlet
2⅛" fully glazed trapway
Closet bolts and caps included
Toilet seat not included
Static load rating of 1000 lbs. (See Notes)
WaterSense compliant when used with a WaterSense compliant
flushometer
COMPLIANCES & CERTIFICATIONS
(BREEAM Materials Credit, BREEAM Water Credit, Carbon
Neutral, Carbon Offset, EPD, Green Globes Materials &
Resources Credit, Green Globes Water Credit, HPD, LEED
Materials & Resources EPD Credit, LEED Materials & Resources
HPD Credit, BAA Compliant)
DOWNLOADS
Sloan Piston Type Exposed Installation Instructions
SS/ST/SU/WETS/WEUS Fixtures Repair and Maintenance
Guide
Additional Downloads
NOTES
All information contained within this document subject to
change without notice.
Static load tested according to the procedure outlined in
Section 6.7 of ASME A112.19.2. Not recommended for bariatric
use.