Specification Sheet
DESCRIPTION
Complete HET system with exposed, AC powered, sensor
activated, Royal
®
OPTIMA
®
Hardwire SMOOTH
™
HET
Flushometer and ADA compliant HET vitreous china water
closet.
Flush Cycle
Model WETS 2020.1302-1.28 HWS (1.28 gpf/4.8 Lpf)
Code: 20201302
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
FEATURES
Automatic
Sloan OPTIMA
®
SMOOTH
™
equipped Flushometers
provide the ultimate in sanitary protection and
automatic operation. There are no handles to trip or
buttons to push. The Flushometer operates by means of
an infrared sensor that adapts to its surroundings. Once
the user enters the sensor’s effective range and then
steps away, the Flushometer Solenoid initiates the
flushing cycle to flush the fixture.
Hygienic
User makes no physical contact with the Flushometer
surface. Helps control the spread of infectious diseases.
72-hour Sentinel Flush keeps fixture fresh during
periods of nonuse.
Economical
Automatic operation provides water usage savings
over other flushing devices. Reduces maintenance
and operation costs.
Practical
Solid state electronic circuitry assures years of
dependable, trouble-free operation. The operational
components of the Flushometer are identical to a
handle operated Royal
®
Flushometer, proven by
more than 100 years of experience.
Warranty
3 year (limited)
The information contained in this document is subject to change without notice.
Sloan Valve Company
10500 Seymour Avenue,
Franklin Park, IL 60131
Phone: 1-800-9-VALVE-9 (982-5839)
or 1-847-671-4300
Fax: 1-800-447-8329 or 1-847-671-4380
www.sloanvalve.com
Copyright © 2013 Sloan Valve Company
WETS-2020.1302 10-13
SPECIFICATIONS
Quiet, exposed, sensor activated diaphragm type,
chrome plated HET Flushometer for either left or
right hand supply and ADA compliant HET vitreous
china fixture with the following features:
Flushometer
• PERMEX
®
Synthetic Rubber Diaphragm with Dual
Filtered Fixed Bypass
• 1” I.P.S. Screwdriver Bak-Chek
®
Angle Stop
• Free Spinning Vandal Resistant Stop Cap
• High Back Pressure Vacuum Breaker Flush
Connection with One-Piece Bottom Hex Coupling
Nut, Spud Coupling and Flange for 1 /
2
” Top Spud
• Sweat Solder Adapter w/Cover Tube and Cast
Wall Flange w/Set Screw
• High Copper, Low Zinc Brass Castings for
Dezincification Resistance
• Non-Hold-Open Handle, Fixed Metering Bypass
and no external volume adjustment to ensure
water conservation
• Flush Accuracy Controlled by CID Technology
• Diaphragm, Stop Seat and Vacuum Breaker to be
molded from PERMEX
®
Rubber Compound for
Chloramine Resistance
• Valve Body, Cover, Tailpiece and Control Stop shall
be in conformance with ASTM Alloy Classification
for Semi-Red Brass. Valve shall be in compliance
to the applicable sections of ASSE 1037.
OPTIMA
®
Hardwire SMOOTH
™
Unit
• ADA compliant OPTIMA
®
SMOOTH
™
AC powered
infrared sensor for automatic “Hands-free” operation
• Mechanical Manual Override Flush Handle
• “User in View” flashing LED
• 25 to 80 psi operating range
• Vandal resistant 1/8" ball-type hex key included
Fixture
• ADA compliant floor mounted vitreous china
• 1 /
2
” I.P.S. top spud inlet
• 2 ⁄
8
” trapway diameter
• Integral flushing rim
• Elongated bowl with siphon jet flush
• Closet bolts and caps included
• 100 % factory flush tested
• Toilet seat not included
Compatible with toilet seat models:
Bemis 1955CT, Bemis 2155CT
• Water closet shall be in compliance to the applicable
sections of ASME A112.19.2/CSA B45.1
Model
WETS 2020.1302-1.28 HWS
OPTIMA
®
Sensor Activated HET Flushometer and ADA Compliant HET Water Closet
Efficiency Series
Meets the American Disabilities Guidelines
and ANSI A117.1 requirements when
installed according to these requirements.
NOTE:
Plumbing System Requirements
• Minimum
Flowing
Pressure: 25 PSI
• Minimum Flow Rate: 18 GPM
• Maximum Static Pressure: 80 PSI