Spec Sheet

Slimline
®
Bedpan
Washer Diverter
Assemblies
Description
Slimline
®
Bedpan Washer Diverter Assembly for use in retrofit installations
where Flushometers currently are installed. Installation meets ADA height
requirements.
Models
DV-110 ADA Installation Height
DV-115 ADA Installation Height with Deoseptic Unit
Specifications
Bedpan Washer Diverter Assembly for use with Flushometer with the
following features:
•
Solid One-piece Body Construction
•
Counter Balanced Pivot Assembly
•
Solid Brass Spray Arm
•
High Back Pressure Vacuum Breaker with One-piece Bottom Hex
Coupling Nut
•
Wall Support, Spud Coupling and Flange for 1¹⁄₂" Top Spud
•
Vacuum Breaker to be molded from PERMEX™ rubber compound for
Chloramine resistance
•
Installation height complies with ADA requirements
Diverter Assembly ONLY. Does NOT include Flushometer.
Variations
BG Bio-Gard™ Spray Arm
R Includes 1" I.P.S. Elbow (to raise existing water supply rough-in)
and Pipe Support
See Accessories Section of Sloan catalog for details on these and other
Flushometer variations.
©
Copyright 1997 SLOAN VALVE COMPANY Printed in U.S.A.
The information contained in this document is subject to change without notice.
This space for Architect/Engineer approval
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL 60131
PHONE: [phone] • FAX: [phone] • http://www.sloanvalve.com
11-20
þ
þ
þ
þ
Made in the U.S.A.
DV-115
DV-110
DV-110
DV-115
for ADA Installation Height