Specification Sheet

u
u
u
The information contained in this document is subject to change without notice.
BASYS
™
EFX-6XX Series S.S. — Rev. 0c (07/11)
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
B
u
y
A
m
e
r
i
c
a
n
A
c
t
•
•
C
o
m
p
l
i
a
n
t
BASYS
™
Series Capacitance Faucet
u
u
u
u
BASYS Spec Language
Sloan BASYS Model No. EFX-6___.____.______ Capacitance
Sensor Activated Electronic Handwashing Faucet for pre-
tempered or hot/cold water supplies. Solenoid valve housed in
removable carrier that closes water supply upon removal,
eliminating need to access control stops. Solenoid carrier
includes mesh filter for easy access and service without
disconnecting the supply lines. Thermostatic mixer ordered
separately to comply with ASSE 1070 requirements. The
product shall be tested and certified to industry standards:
ASME A112.18.1M, CSA B125.1, California Health and Safety
Code 116875 (AB1953-2006), and Vermont Bill S.152. This
product meets ADA ANSI/ICC A117.1 requirements.
Description
Battery powered, sensor activated, electronic, chrome plated die cast body, integrated base hand
washing faucet for pre-tempered or hot and cold water operation.
Flow Rates
£
0.5 gpm/1.9 Lpm Multi-Lam Spray
£
1.5 gpm/5.7 Lpm Aerated Stream
£
1.5 gpm/5.7 Lpm Laminar Stream
Specifications
Battery Powered, Sensor Activated, Electronic, Chrome Plated Die Cast Body, Hand Washing
Faucet with the following features:
• One tool service
• Solenoid housed in removable carrier that includes supply strainer
• Integral water supply shut off
• Supply strainer serviceable from above deck
• Vandal resistant spray insert, key housed inside faucet body
• All electronics sealed to IP-67
• Gold plated electrical contacts
• Above deck individual diagnostic indicators for battery life, solenoid condition, and power-up
mode
• Automatically selects pre-set time-out based on flow rate
• Capacitance sensing eliminates potential vandal point
• Flexible, high pressure supply hoses, 3/8” compression connections
• Bi-stable magnetic solenoid
• Four (4) “AA” alkaline batteries
• Double infrared sensors with automatic setting feature
• Integral 4-inch base
• Includes all mounting hardware
• Line Purge mode, eliminates stagnant water
• Line powered using a variety of volatage adapters
• Batteries act as a backup in line powered application
• Thermostatic, below deck for ASSE 1070 compliance
Model Creation Guide
Options
£
EAF-23
Splitter
£
EAF-24-A
11-13/16” Extension Cable
£
EAF-25-A
47-1/4” Extension Cable
£
EAF-17-A
126” Extension Cable
Special Finish
£
PVDSF
Satin (Chrome) Finish
Warranty
3 year (limited)
EFX-650.010.0000 Shown
EFX 6 X 0 . X 1 X . 0 0 X 0
EFX-6X0-X1X-00X0
Body
Type
Power Crown
.
Mix Sensing Flow Rate
.
Battery
Type
Base
Plate
Adapters
Drain
Pop-
Up
0
–
£ Hardwire
Standard
.
£ None
–
£ 0.5 gpm
Multi-Lam
.
Alkaline None
£ None
No
1
– – –
.
£ Below
Deck
Mechanical
Capacitance
–
.
– –
£ Plug-In
–
2
– – –
.
£ Below
Deck
Thermostatic
–
£ 1.5 gpm
Aerated
.
– –
–
–
3
_
– –
.
– –
£ 1.5 gpm
Laminar
.
– – – –
4
– – –
.
– – –
.
– –
£ Box
Mount
–
5
–
£ Battery
–
.
– – –
.
– – – –
6
Integrated
Base
– –
.
– – –
.
– – – –