Installation Sheet

9
REPLACE SPRAY INSERT
B
Retrieve spray removal tool located near the spray insert.
C
Insert spray removal tool into spray slot by sliding hook end
of key between faucet spout and insert. Pull insert out of
faucet once hooked.
D
Install new insert.
NOTE: If changing to a different flow rate solenoid
caddy must also be changed.
E
Return spray removal tool to storage location.
NOTE: This can only be done once spray head is
installed. This will lock the spray head in place.
NOTE: If spray head is inserted incorrectly – key
will not lock in properly. Turn faucet on to push
insert out and re-install.
A
Remove crown by loosening hex screw located on underside
of spout and slide crown down and lift off.
NOTE: Screw is captive within faucet body.
UNLOCK
G
Slide on crown and secure.
LOCK
NOTE: TURNING OFF WATER IS NOT NECESSARY, DUE TO INTEGRATED AUTOMATIC STOP VALVE.