Specification Sheet

EAF-150-ISM
EAF-150-ISM-DPU-IC
EAF-150/EAF-150-IC
The Optima faucet
— Bringing intelligence to water
Sloan’s Optima EAF-150 Series electronic hand washing faucets activate
by means of a dual infrared sensor and microprocessor based logic that
utilize self-adapting technology to ensure superior performance. The modular
design incorporates all of the operating components of the faucet, including
the sensor, solenoid, circuitry and battery above the sink within a die-cast
metal spout.
ISM models feature an integral temperature control lever which allows the
user to adjust the water temperature. This adjustment can also be converted
to a fixed setting. EAF faucets ordered without the ISM variation must be
connected to a single, pre-tempered water supply.
The i.q.-Click feature allows the user to place the faucet into optional
function modes, including “continuous run” and “temporary off” simply
by pressing a button on the spout. The use of the i.q.-Click feature is
recommended only in installations where users have a regular familiarity with
the faucet (i.e., executive and non-public rest rooms). Models furnished with
the i.q.-Click feature are also available with a Pop Up Drain.
Optima EAF-150 series faucets include a 6 VDC lithium battery. Battery
life is approximately three (3) years.
The information contained in this document is subject to change without notice.
Optima i.q. EAF-150 S.S. — Rev. 3a (01/12)
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
EAF-150-ISM-IC
Electronic Hand Washing Faucet
Description
Sensor Activated Electronic Hand Washing Faucet for pre-tempered or hot and cold water operation.
Battery Powered Models
£ EAF-150 Single Supply Faucet (For pre-mixed water only)
£ EAF-150-IC Single Supply Faucet (For pre-mixed water only) and i.q.-Click
£ EAF-150-ISM With Integral Spout Temperature Mixer (For Hot and Cold supply)
£ EAF-150-ISM-IC With Integral Spout Temperature Mixer and i.q.-Click
£ EAF-150-ISM-DPU-IC With Integral Spout Temperature Mixer, Drain Pop Up and
i.q.-Click Feature
Flow Rate
£ 2.2 gpm/8.3 Lpm Max. Flow Aerator
Specifications
Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing Faucet with the following
features:
• ModularOne-pieceConstructionwithallConcealedComponentsabovedeck
• DoubleInfraredSensorswithAutomaticSetupandIndicatorLight
• AutomaticSelf-adaptingSensorTechnology
• LowBatteryIndicator
• MagneticSolenoidValve
• WaterSupplyConnectionwithFlexibleHigh-pressureHoseandStrainer
• 6voltLithium2CR5CommercialBatteryincluded
• AppropriateMountingHardwareincluded
• Optional24HourSentinelActivation
Variations
£ ISM Integral Spout Mixer
£ IC i.q.-Click feature
£ DPU Drain Pop Up
£ TN 10 Second Time Out
Accessories
• Trim Plates
£ SFP-11 TrimPlatefor4”(102mm)CentersetSink
£ SFP-22 TrimPlatefor8”(204mm)CentersetSink
Trim Plates must be specified and ordered separately.
• Aerator
£ EAF-12 0.5 gpm/1.9 Lpm Max. Spray Head
Warranty
3 year (limited)
Compliant to: ASME A112.18.1-2005/CSA B125.1-05, ISO/IEC 17025