Specification Sheet
EAF-200-ISM
EAF-200
The new Optima faucet
— Bringing intelligence to water
Sloan’s new Optima EAF-200 Series electronic hand
washing faucets operate by means of a dual infrared sensor
and microprocessor based logic. The modular design
incorporates all of the operating components of the faucet,
including the sensor, solenoid and circuitry above the sink within
a die-cast metal spout.
ISM models feature an integral temperature control lever which
allows the user to adjust the water temperature. This adjustment
can also be converted to a fixed setting. EAF faucets ordered
without the ISM variation must be connected to a single, pre-
tempered water supply.
The i.q.-Click feature allows the user to place the faucet into
optional function modes, including “continuous run” and
“temporary off” simply by pressing a button on the spout. The
use of the i.q.-Click feature is recommended only in
installations where users have a regular familiarity with the
faucet (i.e., executive and non-public rest rooms). Models
furnished with the i.q.-Click feature are also available with a
Drain Pop Up.
Optima EAF-200 series faucets are powered by a 6 VDC
plug-in transformer. Each transformer can supply power for up
to six (6) faucets by means of the Daisy Chain Electrical Cable
and Capacitor Box included with each (-LT) faucet.
The information contained in this document is subject to change without notice.
Optima Lino EAF-200 S.S. — Rev. 0c (08/07)
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
Electronic Hand Washing Faucet
Description
6 VDC Transformer Powered, Sensor Activated, Electronic Hand Washing
Faucet for pre-tempered or hot and cold water operation.
6 VDC Plug-in Transformer Powered Models with Transformer (-P)
EAF-200-P Single Supply Faucet
(For pre-mixed water only)
EAF-200-P-ISM With Integral Spout Temperature Mixer
(For Hot and Cold water supply connection)
EAF-200-P-ISM-IC With Integral Spout Temperature Mixer
and i.q.-Click Feature
EAF-200-P-ISM-DPU-IC With Integral Spout Temperature Mixer,
Drain Pop Up and i.q.-Click Feature
6 VDC Plug-in Transformer Powered Models less Transformer (-LT)
(must order transformer separately)
EAF-200-LT Single Supply Faucet (For pre-mixed water only)
EAF-200-LT-ISM With Integral Spout Temperature Mixer
(For Hot and Cold water supply connection)
EAF-200-LT-ISM-IC With Integral Spout Temperature Mixer
and i.q.-Click Feature
EAF-200-LT-ISM-DPU-IC With Integral Spout Temperature Mixer,
Drain Pop Up and i.q.-Click Feature
Flow Rate
0.5 gpm/1.9 Lpm Aerator Spray Head
Specifications
Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing
Faucet with the following features:
• Modular One-piece Construction w/ all Concealed Components above deck
• Double Infrared Sensors with Automatic Setting Feature and Microprocessor
• Magnetic Solenoid Valve
• Water Supply Connection with Flexible High-pressure Hose and Strainer
• 6 Volt DC Plug-in Transformer (must be ordered separately for less
transformer (-LT) faucets)
• Daisy Chain Electrical Cable and Capacitor Box included with less
transformer (-LT) faucets
• Appropriate Mounting Hardware included
Variations
ISM Integral Spout Mixer
IC
i.q.-Click feature
DPU Drain Pop Up
Accessories
• Trim Plates
ETF-312-A Trim Plate for 4” (102 mm) Centerset Sink
ETF-510-A
Trim Plate for 8” (204 mm) Centerset Sink
Trim Plates must be specified and ordered separately
• Aerators
EAF-10
2.2 gpm/8.3 Lpm Aerator Spray Head
EAF-13
2.2 gpm/8.3 Lpm Laminar Flow Spray Head
• Transformer
EAF-11
6 VDC Plug-in Transformer
EAF-37
6 VDC Box Mount Transformer
• Plug-in Transformer Adapters
EAF-38
European Plug-in adapter
EAF-39
United Kingdom Plug-in Adapter
• Extension Cables
EAF-24-A
11-13/16” (300 mm) Extension Cable
EAF-25-A
47-1/4” (1200 mm) Extension Cable
EAF-17-A
126” (3200 mm) Extension Cable
• Faucet Extension Kit
EAF-35-A
Faucet Extension Kit
Warranty
3 year (limited)
ADA Compliant