Installation Sheet

ManualsBrandsSloan ManualsBathroom Sink FaucetsPolished Chrome Touchless Single Hole Bathroom Sink Faucet

Code No. 0816496

Rev. 3 (08/10)

INSTALLATION INSTRUCTIONS FOR SLOAN SF SERIES

ELECTRONIC SENSOR ACTIVATED LAVATORY FAUCETS

LIMITED WARRANTY

Sloan Valve Company warrants its SF Series Electronic Hand Washing Faucets to be made of first class materials, free from defects of material or workmanship under normal use and

to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of one year from date of purchase.

During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost,

and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or

organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY

RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

SF-2100 Series

Adapter Powered with Battery Backup,

Sensor Activated, Pedestal Style Lavatory Faucets

SF-2150 Series

Battery Powered, Sensor Activated,

edestal Style Lavatory Faucets

SF-2200 Series

Adapter Powered with Battery Backup

Sensor Activated, Gooseneck Style

Lavatory Faucets

SF-2250 Series

Battery Powered, Sensor Activated

Gooseneck Style Lavatory Faucets

SF-2300 Series

Adapter Powered with Battery Backup

Sensor Activated, 4” Centerset Lavatory Faucets

SF-2350 Series

Battery Powered, Sensor Activated

” Centerset Lavatory Faucets

SF-2400 Series

Adapter Powered with Battery Backup,

Sensor Activated, Pedestal Style Lavatory

Faucets

SF-2450 Series

Battery Powered, Sensor Activated,

Pedestal Style Lavatory Faucets

Prior to installing the Sloan SF Series Electronic Lavatory Faucet, install

the items listed below. Also, refer to the appropriate rough-in diagram.

•

Plug-In Adapter

Models SF-2100/SF-2200/SF-2300/SF-2400 only

— Install

electrical receptacle(s) for plug-in adapter(s) — 120 VAC, 1 amp

service for each 6 VDC plug-in adapter used.

International models may be supplied with a 220 VAC/VDC

transformer.

• Hot and cold water supply lines or tempered water supply line

• Drain lines

International models are supplied with 1/2” G water connections.

Important:

•

INSTALL ALL ELECTRICAL WIRING IN ACCORDANCE WITH

NATIONAL/LOCAL CODES AND REGULATIONS.

•

INSTALL ALL PLUMBING IN ACCORDANCE WITH APPLICABLE CODES

AND REGULATIONS.

•

A 6 VDC STEP-DOWN ADAPTER MUST BE USED FOR HARDWIRE

APPLICATIONS.

•

BEFORE CONNECTING COPPER TUBE(S) OR FLEX HOSE(S) TO

SUPPLY STOP(S), FLUSH ALL WATER LINES UNTIL WATER IS CLEAR.

PRIOR TO INSTALLATION

TOOLS REQUIRED FOR INSTALLATION

• Electric drill for drilling anchor holes (1/4” or 6 mm drill bit)

• Straight blade and phillips blade screwdrivers

• Open end wrenches (9, 11, 13, 16, 22 mm)

The components supplied with International Models of the SF Series Faucets may vary from what is shown in this manual. Consult factory to identify

variations that may apply to your market.

Summary of content (8 pages)

PAGE 1
Code No. 0816496 Rev.
PAGE 2
FAUCET ROUGH-IN SF-2200 / SF-2250 Series SF-2100 / SF-2150 Series 2-1/8” (54 mm) SPOUT SPOUT 1-1/4” (32 mm) MIN. DIA. HOLE REQUIRED TRIM PLATE 2-1/8” (54 mm) TRIM PLATE - Supplied with SF-2200/SF-2250 Optional item for SF-2200-INTL/SF-2250-INTL GASKET 1-1/4” (32 mm) MIN. DIA. HOLE REQUIRED 1-1/2” (38 mm) MAX. DECK THICKNESS RETAINER SF-2300 / SF-2350 Series COPPER TUBE OR FLEX HOSE 36” (914 mm) LONG SENSOR CABLE 1-1/2” (38 mm) MAX.
PAGE 3
1A - SF-2100/2150 & SF-2400/2450 SERIES: INSTALL FLEX HOSE AND MOUNTING STUDS 1B - SF-2200/2250 & SF-2300/2350 SERIES: INSTALL FLEX HOSE A Install Mounting Studs. B Install Flex Hose. A Install Flex Hose.
PAGE 4
3A - SF-2100/2150 & SF-2200/2250 SERIES: INSTALL RUBBER GASKET, RETAINER, AND RETAINER NUT(S) A Secure Faucet to the Deck by installing Rubber Gasket, Retainer and Retainer Nut(s). Tighten Retainer Nuts securely. Do not overtighten. Rubber Gasket Retainer Rubber Gasket Retainer Retainer Nut Rubber Gasket Retainer Retainer Nut Retainer Nuts 3B - SF-2300/2350 SERIES: INSTALL SLOTTED MOUNTING WASHERS AND WING NUTS A Secure Faucet to the Deck by installing Slotted Mounting Washers and Wing Nuts.
PAGE 5
- CONNECT SENSOR CABLE AND WATER LINES TO CONTROL MODULE A Connect Sensor Cable (from Faucet). Note: Adapter — For 3/8” Connections only. B Connect Flex Hose (from Faucet). C Connect Water Line (supplied with INTL Models only) to Supply Stop and Control Module. C A B 6 - INSTALL BATTERIES A Loosen Cover Screws and remove Cover from Control Module.
PAGE 6
7B - GANG ADAPTER INSTALLATION !!!!IMPORTANT!!!! PLUG-IN GANG ADAPTER KIT SFP-35-A DO NOT PLUG IN THE ADAPTER UNTIL ALL CONNECTIONS ARE MADE To connect multiple faucets to a single adapter, use the Sloan SFP-35-A Gang Adapter Kit (Purchase Separately). The SFP-35-A Gang Adapter Kit is supplied with cables to connect up to 6 faucets. To connect up to 8 faucets, purchase 2 additional SFP-38 Cable Splitters separately.
PAGE 7
10 - TEST FAUCET OPERATION 1. Place hands under faucet. Solenoid valve should “click,” LED in sensor window should blink once and water should flow from the spout. 2. When hands are removed, the water flow should stop. CARE AND CLEANING OF CHROME AND SPECIAL FINISHES DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean Faucets that may dull the luster and attack the chrome or special decorative finishes. Use ONLY mild soap and water, then wipe dry with clean cloth or towel.
PAGE 8
PARTS LIST 1B 1A 1C 1D 12 11 3 5B 13 2H 2D 10 2E 10A 2C 2A 7 4 2B 8 5A 2F Item No. 1A 1B 1C 1D 2 2A 2B 2C 2D 2E 2F 2G 2H 3 4 5A 6 7 8 9 6 Part No.