Specification

Description
Below Deck Mechanical Water Mixing Valve for use with a single Sloan
Optima
®
faucet.
Model
! Model MIX-60-A
Supplied with Sloan Optima and Optima Plus faucets that are specified with the
“BDM” (Below-Deck-Mixer) variation.
Specifications
Mechanical Water Mixing Valve with the following features:
• Designed to install under the lavatory
• Installs in place of the Tee fitting supplied with the faucet prior to the
solenoid valve
• Equipped with integral check valves at inlets
• 3/8” compression fittings on inlets and outlet
• Compression sleeves and nuts included
• Lever dial adjustment with lock screw: COLD-HOT
• Brass construction
• Chrome plated finish
Flow Capacities
!
!
!
The information contained in this document is subject to change without notice.
Optima MIX-60-A S.S. — Rev. 1 (08/01)
Copyright © 2001 SLOAN VALVE COMPANY Printed in the U.S.A.
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: [phone] or 1-847-671-4380
http://www.sloanvalve.com
Mechanical
Mixing
Valve
!
Made in the U.S.A.
SYSTEM PRESSURE
PSI 20 30 40 50 60 70
BAR 1.4 2.1 2.8 3.4 4.2 4.9
GPM 1.75 2.25 2.75 3.0 3.5 4.0
Lpm 6.62 8.51 10.40 11.35 13.25 15.14
CAUTION! This is a mechanical hot and cold mixing valve only! It does NOT provide
automatic control of water temperature. Hot water in excess of 110°F (43°C) is
dangerous and CAN CAUSE SCALDING!
3/4”
(19 mm)
2-13/16”
(71 mm)
3/8” COMPRESSION
CONNECTIONS (3)
1-3/8”
(35 mm)