PLS8695 Powered True Line Source Array Owner’s Manual Rev: 512 1650 W.
PLS8695 True Line Source Array Owner’s Manual Page 2 1. Important Safety Instructions 1.1 CAUTION To reduce the risk of electric shock, do not remove the back panel of the PLS8695. There are no user-serviceable parts inside. Refer servicing to SLS Loudspeakers or qualified personnel. 1.2 General Safety 1.2.1 Read and follow all warnings, operating and safety instructions in this manual and on the unit. 1.2.
PLS8695 True Line Source Array Owner’s Manual Page 3 2. Introduction 2.1 Welcome to SLS Thank you for choosing SLS Loudspeakers! SLS Loudspeakers is a leader in digital amplification and ribbon technology allowing for a new level of sound reproduction, clarity, and definition. Should you need to contact SLS you can visit our website at www.slsaudio.com or contact our headquarters: SLS Loudspeakers 1650 W. Jackson Ozark, MO 65721 417-883-4549 2.
PLS8695 True Line Source Array Owner’s Manual Page 4 3. General Use and Operation 3.1 Back Panel Note 3.8 Note 3.8 Note 3.8 Note 3.8 Note 3.6 Note 3.11 Note 3.4 Note 3.11 Note 3.10 Note 3.4 Note 3.9 Rev: 512 Note 3.7 1650 W.
PLS8695 True Line Source Array Owner’s Manual 3.2 Page 5 Positioning The PLS8695 has a very defined vertical dispersion, which helps prevent interaction with the floor and ceiling and extends the nearfield listening area. It is important to set the speaker so the bottom of the box is approximately at chest height of the first listeners. The speaker may be tilted for proper positioning relative to the coverage area.
PLS8695 True Line Source Array Owner’s Manual 3.8 Page 6 Status Indicators “CLIP” indicates when Channel 1 is clipping. “PROT” indicates when the power supply protective circuitry has been engaged. It may be necessary to cycle the power to reset the protective circuitry. “PWR” indicates that power is present in the amplifier. “SIG” indicates that signal is present at the input of the amplifier. 3.9 Programming Port This port is used by SLS to program the EEPROM for DSP processing data.