User manual

1. NOTES ON SAFETY
 Installation, mounting or works on the electrical connection may
only be carried out by an approved electrician.
 The connection cord cannot be replaced when damaged. Do not
operate the product with a damaged connection cord. In this
case the complete product must be disposed.
 Do not cover the product - provide free air circulation!
 Do not hang or fasten anything on the product, especially no
decoration.
 Keep children away from the product.
 Operate the product only when it functions properly:
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
 If touched or further operated there is danger from electric shock,
burning, or fire.
A malfunction exists when:
 visible damages appear.
 the product does not work properly (e.g. flickering).
 smoke, steam or crackling sounds appear.
 smell of burning is recognisable.
 an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
2. USE AS DIRECTED
This product serves exclusively lighting purposes and may:
 only be used with a voltage of 230V ~50Hz.
 only be operated when firmly mounted.
 not be exposed to strong mechanical loads or to strong
contamination.
 only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
 not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
3. OPERATION
 Replacing the light source: Under regular usage the LED bulb has an
extraordinary long lifetime. If nevertheless damage or failure occurs,
contact your local dealer to exchange the LED bulb.
4. MAINTANANCE AND CARE
The following enviromental influences may have unwanted effects on
the surface of the product:
 acid rain and sour soil  high salt content in the air
 thawing salt  cleaning agents
 fertilizer especially in flowerbeds
 other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
Disconnect the product from the power supply and let it cool down,
before you do maintenance or clean the product.
 If disregarded there may be danger of electric shock or by burning
when cleaning the product.
 Cleaning: Clean the product on a regular basis using a slightly
moistened, soft and fluff-free cloth.
5. ADDITIONAL IMPORTANT NOTES
Storage: The product must be stored in a dry and clean environment. Do
not strain the product mechanically during storage.
Warranty: In case of a warranty contact your dealer.
Disposal: Notes on the correct disposal in Germany are found on
www.slv.de.
SLV Elektronik GmbH
ENGLISH
OUTDOOR LIGHT
NAULTILUS LED 304
Installation manual for the electrician
User manual for the user
Please read carefully and keep accessible for further
reference !
Technical Data:
Operating voltage: 230V ~50Hz
Safety class: I
Safety type: IP 55
Light source: Power LED, 3 x 1W
Dimensions (W/H/D): 10/14,5/9,5 cm
Rotary-/Swivel range 360°/ 270°
Weight: 0,66 kg
Importer: SLV Elektronik GmbH
IP 55: Protection against disturbing dust deposition - Protection against
jetted water from all directions
art.-no. 230801/02/11/12 12/2008
© SLV Elektronik GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg,
Germany, Tel. [phone]
Technical Details are subject to change.
USER MANUAL
for
OUTDOOR LIGHT
NAULTILUS LED 304