SMPROAUDIO ct-3 CT-3 Advanced cable tester V1.
SMPROAUDIO ct-3 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, do not remove the cover or rear panel of this unit. No user serviceable parts inside. Please refer servicing to qualified personnel only. WARNING: To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture. DETAILED SAFETY INSTRUCTIONS: All safety and operation instructions of this manual should be read and adhered to before operation.
FOREWORD SMPROAUDIO ct-3 Dear Customer, Thank you very much for expressing your confidence in SM ProAudio products by purchasing this unit. The CT-3 has been designed to be used as a standard tool for home/pro studios, P.A. rental companies, Schools and in many other situations where audio products would be used.
SM CT-3 Main Features SMPROAUDIO ct-3 -8-position Automatic indication cable tester -Allows connection between different format connectors with ease -'Banana' connector continuity tester with beeper and LED indicator -Super rugged construction for durability and long life -2 x DMX (5-pin) -2 x BNC -2 x RCA Phono -2 x XLR -2 x MIDI (5-pin DIN) -2 x Speakon -2 x Banana -2 x 1/4" (6.5mm) TRS/TS -2 x Rj45 -2 x RJ11 1.
SM Ct3 Connections SMPROAUDIO ct-3 B A C H D G E F A. Receiver side B. Loudness of the BEEP sound when testing cables and showing channel 1 connection C. Sender side (voltage goes OUT from here to a cable for testing) D. The speed at which the testing of cables occurs E. ON-OFF switch for the sender F. Battery compartments for 2 x 9V DC batteries G. Tone test - OFF - Cable Test switch H. Input points and LED indication for the Tone test and continuity tester.
SMPROAUDIO ct-3 Using the CT-3 Example 1. A. Connect an XLR cable from one side of the Ct3 (the Sender) to the other side (the receiver). B. Switch ON the Sender (E), if a battery is installed you should see the first yellow LED’s lighting in sequence and then the other 5 LED’s not being lit at all. Note if no cable is connected to the SENDER the Yellow LED’s would not light up. C.
SMPROAUDIO ct-3 1 WARRANTY CARD To be protected by this warranty, the buyer must complete and return the enclosed warranty card (signed/stamped by retail dealer) within 14 days of the date of purchase to SM Pro Audio (see address below 3). Failure to return the card in due time (date as per postmark) will void any extended warranty claims. 2 WARRANTY 1.
SMPROAUDIO ct-3 4 WARRANTY REGULATIONS 1. Warranty services will be furnished only if the product is accompanied by an original retail dealer's invoice. Any product deemed eligible for repair or replacement by SM Pro Audio under the terms of this warranty will be repaired or replaced within 30 days of receipt of the product at SM Pro Audio. 2.
