HP6E Operating Manual August 2012
SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, do not remove the cover or rear panel of this unit. No user serviceable parts inside. Please refer servicing to qualified personnel only. WARNING: To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture. DETAILED SAFETY INSTRUCTIONS: All safety and operation instructions of this manual should be read and adhered to before operation.
FOREWORD Dear Customer, Thank you very much for expressing your confidence in SM ProAudio products by purchasing this unit. The HP6E has been designed to be used as a standard tool for home/pro studios, P.A. rental companies, Schools and in many other situations where audio products would be used. With much experience in the audio industry over a long period of time, and along with valuable suggestions from our customers, our engineers have developed a product we know you will be satisfied with.
1. HP6E Main Features • • • • • • • • 10 TRS inputs, 5 stereo channels Mix add control for each amplifier output 6 class A stereo headphone amplifiers Nominal output @ 32Ohm 600mw per channel Frequency response @100mw output 20Hz-20kHz +- 0.3 dB Built in flash memory for last state memory save Sturdy metal construction 1U 19” rack-mountable device 2.
4.4 Headphone level Use this control to adjust the overall headphone output level 4.5 Headphone output Use this output to connect your headphones. Make sure that your headphones are not below 8Ohm in resistance otherwise you may damage the HP6E. 4.6 Power switch This switch is used to switch the HP6E ON or OFF. Make sure correct voltage is selected on the unit before switching the power ON. 5. HP6E Back panel The back panel has 4 stereo 1/4” (6.
Be careful! The HP6E is very loud and can easily damage your ears if not used properly. Never switch the unit ON or OFF while wearing headphones. An example of using the MIX input might be if the whole band is mixed onto one stereo channel and the individual singers are on each of the 4 selectable channels. The singers are then able to select how much of the MIX they want to hear compared to their own voice. Alternatively it can be used as a TALK BACK channel as well.
.4 Warranty Regulations 7.4.1. Warranty services will be furnished only if the product is accompanied by an original retail dealer‘s invoice. Any product deemed eligible for repair or replacement by SM Pro Audio under the terms of this warranty will be repaired or replaced in the best possible manner. 7.4.2.
ALL RIGHTS RESERVED © 2012 SM Pro Audio All illustrations, descriptions and technical specifications are subject to change without prior notice. SM Pro Audio Service Department W25, 26-28 Roberna St Moorabbin Melbourne, Victoria Australia 3189 www.smproaudio.
