SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, do not remove the cover or rear panel of this unit. No user serviceable parts inside. Please refer servicing to qualified personnel only. WARNING: To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture. DETAILED SAFETY INSTRUCTIONS: All safety and operation instructions of this manual should be read and adhered to before operation.
IN5E Main Features: The new IN5E from SM Pro Audio covers a huge range of applications for use in the home/project studio. It is suitable for mixing various analog audio signals to a high quality recording output channel in either high quality low noise analog or pristine 24-bit 96 kHz digital format via USB. This makes the IN5E to a truely high quality audio interface which can be directly connected to a computer.
Table of Contents Safety Instructions 2 Main Features and Foreword 3 1. Introduction 5 2. 2.1 2.2 The Design Concept High quality components and design Inputs and outputs 5 3. Overview 5 4. 4.1 4.2 4.3 Installation What’s included in the box Rack mounting Mains voltage 6 5. 5.1 5.2 5.3 5.4 Rear Panel Connections GND - Ground pin connector Ground Lift Switch L&R Stereo Unbalanced & Balanced Audio Outputs L&R Stereo RCARecord Input and outputs 6 6. 6.1 6.2 6.3 6.4 6.5 6.
1. Introduction Functionality - Versatility - Mix - Record - Monitor - Convert - Inject and Digitize!!! The new IN5E from SM Pro Audio covers a huge range of applications for use in the home/project studio. It is suitable for mixing various analog audio signals to a high quality recording output channel in either high quality low noise analog or pristine digital format via USB. Many users will be glad to see the options provided for connectivity.
4. Installation Your SM ProAudio IN5E was carefully packed in the factory and the packaging was designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred in transit. * If the unit is damaged, please do not return it to us, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted.
5.6 Ethernet input and microphone insert point The IN5E supports you with a new breed of analog audio distribution features. With just one standard CAT5 cable it is now possible to transmit up to three channels of audio. Perfect, if you are going to use the IN5E as recording interface in a studio. No more cable hassles and fear of broken audio cables during a recording session. This new connection is truely passive without any influences on th sound! Just check your local dealer and www.violetaudio.
6.4 Stereo headphone amplifiers Independent (2 x) rotary monitor volume controls, and MIX/REC switch. This is where you can connect up to two stereo headphones, control their volume, and choose either to monitor the full mix of your signals from both the front panel inputs and the REC inputs together, or just the REC input signal from the rear panel. The MIX/REC switch toggles the monitor mode of the headphone amplifiers. 6.
Step 3 Monitor the results from your speakers or headphones. 7.4 The IN5E as a computer interface The IN5E can act as a pretty nifty Interface for your computer. As all major operating systems come with plug and play it’s just about connecting the IN5E via USB cable. As no drivers are needed the IN5E works with low latency drivers (Core Audio) within your Mac OS X System. Under Windows we recommend that you install the Freeware ASIO4all (www.asio4all.com) to have decent ASIO drivers within your DAW.
8. Specifications Audio Inputs Connectors 1/4" jack TRS Balanced, XLR Balanced RCA Unbalaced 47k Ohms / 600Ohm -20dB +16dB Impedance Min Sensitivity Peak input level Mic Inputs Connector Type Impedance Min sensitivity Peak input level Phantom Power Headphone Outputs Connectors Type Stero Line Mixer Outputs Connectors Impedance Max. output level XLR Balanced Outputs Connectors Type Min. output impedance Max.
9. WARRANTY 9.1 WARRANTY CARD &/OR WEBSITE REGISTRATION To be protected by this warranty the purchaser of the product must complete an SM Pro Audio product registration procedure. Product registration is available via two methods: - Complete and return the enclosed warranty card within 14 days of the date of purchase to SM Pro Audio (see address below). - Complete an online product registration form at the SM Pro Audio website. www.smproaudio.com 9.
9.4 WARRANTY REGULATIONS - Warranty can only be serviced when accompanying proof of purchase is provided. Dealers invoice and date stamp required. - SM Pro Audio will endeavor to repair or replace any product under the terms of this warranty within 30 days of receipt of the product at SM Pro Audio.