Instruction Manual

SM Pro Audio Page 7 of 11 Juicerack / Juiceblock Manual
!
!
8 Juicerack 8
!
JuiceRack 8 is a 19” rack-mount power source designed to house up to eight 500-series single slot
modules in a vertical configuration. The rear panel sports eight slots of balanced XLR inputs and
outputs along with eight slots of unbalanced 1/4” inputs and outputs.
A 48V phantom power switch is located on the front of the rack. When the +48V button is pushed,
the master phantom power is enabled, and each module may now enable its own phantom power.
8.1 Audio Routing:
• FEED - Sends the audio output of one module to the input of the next module
1. Press the select button until the feed LED is on
2. Press the status select button until 1-2 flashes twice
3. Press the ON/OFF button
4. The solid blue light shows output 1 is being fed into input 2.
5. Repeat the above process for feeding the other inputs.
6. NB: Inputs are fed in series.
Below is an example of how the feed button routes the audio
• LINK1 - Split a single balanced input and sends it to multiple modules simultaneously
1. Press the select button until Link1 LED is on
2. Press the status select button until the channel you wish to link is lit
3. Press the ON/OFF button
4. Repeat the above process to link further channels
Below is an example of how the LINK 1 button routes the audio
Input 1 is linked to inputs 2 & 3, whilst a separate input in module 6 is linked to inputs 7 & 8