Manual

Accepting the settings
Saving the made settings is indicated by an hourglass symbol on the user interface. If the DC
voltage is sufficient, the data is transferred directly to the inverter and accepted. If the DC
voltage is too low (e.g. in the evening), the settings are saved, but they cannot be directly
transferred to or accepted by the inverter. As long as the inverter has not yet received and
accepted the settings, the hourglass symbol will continue to be displayed on the user
interface. The settings will be accepted when there is sufficient DC voltage applied and the
inverter restarts. As soon as the hourglass symbol appears on the user interface, the settings
have been saved. The settings will not be lost. You can log off of the user interface and leave
the system.
Adopting the Configuration From a File
You can adopt the inverter configuration from a file. To do this, there must be an inverter
configuration saved to a file.
Procedure:
1. Select the configuration option Adopting configuration from a file.
2. Select [Browse...] and select the desired file.
3. Select [Import file].
Configuration with the Installation Assistant (Recommended)
A
C
B
Figure 15 : Layout of the installation assistant
Position Designation Description
A Configuration steps Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
B User information Information about the current configuration step and the
setting options of the configuration step.
C Configuration field You can make settings in this field.
7 Commissioning
SMA Solar Technology America LLC
Installation ManualSB30-77-1SP-US-40-IA-xx-1354
ENGLISH