User and installation manual

4 Product Overview
SMA Solar Technology AG
Installation Manual SBSxx-US-10-IA-xx-12 15
Position Designation
F Type label
The type label uniquely identifies the inverter. The type label must remain
permanently attached to the product. You will find the following informa-
tion on the type label:
• Inverter device type (Model)
• Serial number of the PowerUnit (Serial No. Power Unit or S/N
Power Unit)
• Date of manufacture
• Device-specific characteristics
G Additional type label
The additional type label must remain permanently attached to the prod-
uct. You will find the following information on the additional type label:
• Device type (Model)
• Inverter serial number (Serial number device or S/N device)
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• WLAN password (WPA2-PSK) for the direct connection to the user
interface of the inverter via WLAN
H LEDs
The LEDs indicate the operating state of the inverter.
4.2 Symbols on the Product
Symbol Explanation
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Observe the documentation
Observe all documentation supplied with the product.
Observe the documentation
Together with the red LED, this symbol indicates an error.
ENGLISH