User and installation manual

7 Commissioning
SMA Solar Technology AG
Installation Manual SBSxx-US-10-IA-xx-12 63
7.5 Selecting a configuration option
After you have logged onto the user interface as Installer, the Configuring the Inverter page
opens.
A
E
B
D
C
Figure 18 : Layout of the Configuring the Inverter page
Position Designation Description
A Device information Provides the following information:
• Device name
• Inverter serial number
• Inverter firmware version
B User information Provides brief information on the listed configuration
options
C Skip configuration Offers the option of skipping the inverter configura-
tion and going directly to the user interface (not rec-
ommended; the inverter cannot be operated without
configuration)
D Checkbox Allows you to choose not to have the displayed page
displayed again when the user interface is called up
again
E Configuration options Provides a selection of the various configuration op-
tions
Procedure:
On the Configuring the Inverter page, different configuration options are available to choose
from. Select one of the options and proceed for the selected option as described below. SMA
Solar Technology AG recommends carrying out the configuration with the installation assistant. This
way, you ensure that all relevant parameters are set for optimal inverter operation.
• Adoption of configuration from a file
ENGLISH