User and installation manual

2 Safety
SMA Solar Technology AG
Installation ManualSBSxx-US-10-IA-xx-128
2 Safety
2.1 Intended Use
The SunnyBoyStorage is an AC-coupled battery inverter for parallel grid and stand-alone mode
operation. The SunnyBoyStorage converts the direct current supplied by a battery into grid-
compliant alternating current. The SunnyBoyStorage, together with a battery and a compatible
energy meter, make up a system for increased self-consumption (FlexibleStorageSystem) or,
together with a automatic transfer switch compatible with SunnyBoyStorage, a battery-backup
system (FlexibleStorageSystem with battery-backup function).
The product must only be used as stationary equipment.
The product is suitable for indoor and outdoor use.
The product may only be operated with one of the energy meters approved by SMA Solar
Technology AG. An updated list of energy meters approved by SMA Solar Technology AG is
available at www.SMA-Solar.com.
The product must only be operated in connection with an intrinsically safe lithium-ion battery
approved by SMA Solar Technology AG. An updated list of batteries approved by SMA Solar
Technology AG is available at www.SMA-Solar.com.
The battery must comply with UL1973 and must be intrinsically safe.
The communication interface of the used battery must be compatible with the product. The entire
battery voltage range must be completely within the permissible input voltage range of the product.
The maximum permissible DC input voltage of the product must not be exceeded.
The product is not suitable for supplying life-sustaining medical devices. A power outage must not
lead to personal injury.
All components must remain within their permitted operating ranges and their installation
requirements at all times.
The product is approved for the US and Canadian market.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable laws, regulations, standards and directives. Any other application
may cause personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and in most cases terminate the operating license. SMA Solar Technology AG
shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as the
intended use.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient, dry place for future reference and observe all instructions contained therein.
This document does not replace and is not intended to replace any local, state, provincial, federal
or national laws, regulations or codes applicable to the installation, electrical safety and use of the
product. SMA Solar Technology AG assumes no responsibility for the compliance or non-
compliance with such laws or codes in connection with the installation of the product.
The type label must remain permanently attached to the product.
ENGLISH