User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Sunny Beam Manual Commissioning
11
Setup
Set Date and Time
When the Sunny Beam is first powered up it will begin with setting the date and time.
NOTE: This is a good opportunity to become familiar with the operation of the
knob. Notice how the selected item changes as the knob rotates. Once the correct
value is displayed, press the knob to select it.
To set, follow these instructions:
• Rotate the knob so that DAY is highlighted. (Indicated by a box around the entire line-
item)
• Press the knob to select DAY
• Rotate the knob until the proper date is showing
• Press the knob to set DAY
• Rotate the knob so that MONTH is highlighted
• Press the knob to select MONTH
• Rotate the knob until the proper month is showing
• Press the knob to set MONTH
• Repeat this process for the remaining items
• When finished, highlight EXIT and press the knob
Figure 1-8 Setting the Date and Time
4VOOZ# FBN
.0/5)
:&"3
)063
.*/65&
&9*5
4&5%"5&5*.&
%":