User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Operation Sunny Beam Manual
28
be set to Group 1. The second set of 4 would be set to Group 2. Then, by changing the Group
number in the Sunny Beam between 1 and 2, each set of 4 inverters could be monitored
separately.
NOTE: Only one group of inverters is monitored at a time. For example, if the
Sunny Beam is set to Group 1, then only those inverters (up to 4) set for Group 1
are monitored. No data is being retrieved or stored for any other group until the
Sunny Beam is set for that Group number.
Service
The Service menu contains items used in troubleshooting and performance related issues.
Figure 1-24 Service Menu
4VOOZ# FBN
4&37*$&
%*"(/045*$4
$0..6/*$"5*0/ 4#FBN
53"/4.*55*/(108&3
&9*5