User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Sunny Beam Manual
iv
IMPORTANT SAFETY INSTRUCTIONS
*SAVE THESE INSTRUCTIONS*
This manual contains important instructions for the Sunny Beam that must be followed during
the installation, operating and maintenance of the Sunny Beam.
The Sunny Beam is designed and tested according to international safety requirements, but as
with all electrical and electronic equipment, certain precautions must be observed when
installing and/or operating the Sunny Beam. To reduce the risk of personal injury and to
ensure the safe installation and operation of the Sunny Beam, you must carefully read and
follow all instructions and warnings in this Installation Guide.
Safety and Hazard Symbols
This symbol is used to call attention to important information that you must have
when installing and/or operating the Sunny Beam. Failure to read and follow
instructions marked with this symbol could result in serious injury and/or damage
to the equipment.
This symbol appears beside instructions and warnings that deal with dangerous
voltages that can injure people who come in contact with them.
Warnings
WARNING: A Warning describes a hazard to equipment or personnel. It calls
attention to a procedure or practice, which, if not correctly performed or adhered
to, could result in damage to or destruction of part or all of the SMA equipment
and/or other equipment connected to the SMA equipment or personal injury.
Warnings may also be accompanied by one or more of the safety and hazard symbols
described above to indicate the type of hazard described therein.
Other Symbols
In addition to the safety and hazard symbols described previously, the following symbol is also
used in this
Installation Manual:
This symbol accompanies notes that call attention to supplementary information
that you should know to ensure optimal operation of the system.