User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Sunny Beam Manual Operation
37
The Data button will download:
• Pac at 10 minute intervals
• Total CO2 offset for the day
• Total Energy for the day
Pressing the Energy button will display the Energy total for the last month/31 days.
NOTE: The daily data collected by the Sunny Beam is only stored in the Sunny
Beam until the beginning of the next day. Therefore, if it is required that the daily
totals be downloaded from the Sunny Beam, it needs to be performed before the
inverters restart the following morning.
Real-Time Data
To view real-time data, click on the Online tab at the bottom of the main SDC window. Then,
right-click in the upper left gray box and select Fade in Devices, and All Devices. SDC will now
show the data for the devices being monitored. Refer to the figure below.
Figure 1-32 Fading in Devices