Install Manual

4 Product Overview
SMA Solar Technology AG
Installation ManualSTP33-62-US-41-IA-en_es-1114
Position Designation
K Type label
The type label clearly identifies the product. The type label must remain
permanently attached to the product. You will find the following informa-
tion on the type label:
• Device type (Model)
• Serial number (Serial No. or S/N)
• Date of manufacture
• Device-specific characteristics
L Additional label with details for registration in SunnyPortal and WLAN
password:
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• WLAN password (WPA2-PSK) for the direct connection to the user
interface of the inverter via WLAN
M Enclosure opening for AC connection
N Enclosure opening for additional cable
O Enclosure opening for carrying handle
P AC load-break switch
4.2 Symbols on the Product
Symbol Explanation
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Observe the documentation
Observe all documentation supplied with the product.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Inverter
Together with the green LED, this symbol indicates the operating state of the in-
verter.
ENGLISH