Install Manual

5 Mounting
SMA Solar Technology AG
Installation Manual STP33-62-US-41-IA-en_es-11 23
1000 (39.37)1000 (39.37)1000 (39.37)
300300
(11.81)(11.81)
300
(11.81)
900 (35.43)900 (35.43)900 (35.43)
1000 (39.37)
100 (3.94)
Figure 6: Recommended clearances(Dimensions in mm (in))
5.2 Mounting the Inverter
Additionally required material (not included in the scope of delivery):
☐ For transport with a hoist: 4 eye bolts (M8)
CAUTION
Risk of injury due to the weight of the inverter
Injuries may result if the inverter is lifted incorrectly or dropped while being transported or when
mounting it to the wall mounting bracket.
• Carry and lift the inverter upright with the help of several people. In doing so, keep in mind
the weight of the inverter and take hold of the carrying handles on the inverter. Always take
hold of the two carrying handles mounted both on each side.
• Take into account the center of gravity of the inverter. The center of gravity is on the side of
the AC-Connection Unit.
Procedure:
1. Attach each foot with two M8x40 hexagon head
screws and two washers on the two external taps
(M8x14) on the underside of the inverter (torque:
16Nm (142in-lb)). Press the packaging on the
bottom side down or cut it open. The screw holes on
the bottom of the inverter must be exposed.
A
_
+
_
+
B
C
D
E
F
4x
ENGLISH