Install Manual
Table Of Contents
- Installation Manual
- Legal Provisions
- Table of Contents
- 1 Information on this Document
- 2 Safety
- 3 Scope of Delivery
- 4 Product Overview
- 5 Mounting
- 6 Electrical Connection
- 7 Commissioning
- 8 Disconnecting the Inverter from Voltage Sources
- 9 Decommissioning the Inverter
- 10 Technical Data
- 11 Compliance Information
- 12 Contact
- Instrucciones de instalación
- Disposiciones legales
- Índice
- 1 Indicaciones sobre este documento
- 2 Seguridad
- 3 Contenido de la entrega
- 4 Vista general del producto
- 5 Montaje
- 6 Conexión eléctrica
- 7 Puesta en marcha
- 8 Desconexión del inversor de la tensión
- 9 Puesta fuera de servicio del inversor
- 10 Datos técnicos
- 11 Información de cumplimiento
- 12 Contacto
6 Electrical Connection
SMA Solar Technology AG
Installation Manual STP33-62-US-41-IA-en_es-11 25
6 Electrical Connection
6.1 Overview of the Connection Area
_
+
_
+
A
B
C
D
E
F
X2
Max. 30V DC
USB
M2
FCC ID: SVF-KP20
IC: 9440A-KP20
ANT.
SPS
B
A
X1
M1
MFRBAT
A
F
D
E
G
_
+
_
+
J
K
B
H
C
I
Figure 7: Connection areas of the inverters' AC Connection Unit and DC Connection Unit
Position Designation
A Slots for AC surge protection devices
B Terminal blocks for AC connection
C Bridge between N and enclosure
D Equipment grounding terminal for the equipment grounding conductor of
the utility grid
E Enclosure opening for AC connection (for 50.8mm (2in) trade size con-
duits)
F Enclosure opening for the connection of an additional conductor (for
27mm (1in) trade size conduits)
G Cable glands for network cables and, if needed, for the connection ca-
bles of the AntennaExtensionKit or other data cables
H Positive and negative connectors for DC connection
I Equipment grounding terminal for the equipment grounding conductors of
the PV array
J Slots for DC surge protection devices
K Communication assembly
ENGLISH