Install Manual
Table Of Contents
- Installation Manual
- Legal Provisions
- Table of Contents
- 1 Information on this Document
- 2 Safety
- 3 Scope of Delivery
- 4 Product Overview
- 5 Mounting
- 6 Electrical Connection
- 7 Commissioning
- 8 Disconnecting the Inverter from Voltage Sources
- 9 Decommissioning the Inverter
- 10 Technical Data
- 11 Compliance Information
- 12 Contact
- Instrucciones de instalación
- Disposiciones legales
- Índice
- 1 Indicaciones sobre este documento
- 2 Seguridad
- 3 Contenido de la entrega
- 4 Vista general del producto
- 5 Montaje
- 6 Conexión eléctrica
- 7 Puesta en marcha
- 8 Desconexión del inversor de la tensión
- 9 Puesta fuera de servicio del inversor
- 10 Datos técnicos
- 11 Información de cumplimiento
- 12 Contacto
9 Decommissioning the Inverter
SMA Solar Technology AG
Installation Manual STP33-62-US-41-IA-en_es-11 55
7. When the AC surge arresters are inserted, pull the
surge arresters out of the slots. To do so, squeeze
the grooved areas on the left and right sides of the
surge arrester.
2
1
1
8. Position the enclosure lid of the AC-Connection Unit
on the AC-Connection Unit and first tighten the
upper-left and lower-right screws, and then the
remaining screws crosswise (TX25, torque: 6Nm
(53in-lb)).
2
1
10x
10x
9. Unscrew (TX25) all ten screws of the enclosure lid of
the DC-ConnectionUnit and remove the enclosure
lid carefully towards the front.
10x
10. Set the screws and the enclosure lid aside and store safely.
11. Remove all connection cables from the
communication assembly and pull out the
connection cables out of the DC-Connection Unit.
X2
Max. 30V DC
USB
M2
FCC ID: SVF-KP20
IC: 9440A-KP20
ANT.
SPS
B
A
12. Remove all conduits with conductors from the inverter. To do this, screw the conduit fittings out
of the enclosure openings from the inside.
ENGLISH