Sunny Boy User Manual
4 Operation
SMA Solar Technology AG
User Manual SBxx-US-1XP-41-BA-en-11 29
Installer password for inverters registered in a communication device or in
SunnyPortal
To be able to register the inverter in a communication device (e.g., SMADataManager) or in
a SunnyPortal system, the password for the user group Installer must match the system
password. If you assign a password for the user group Installer via the user interface of the
inverter, the same password must also be used as the system password.
• Assign a uniform installer password to all SMA devices in the system.
Procedure:
1. In the drop-down list Language, select the desired language.
2. In the Password field, enter a password for the User user group.
3. In the Repeat password field, enter the password again.
4. Click on Save.
5. In the New password field, enter a password for the Installer user group. Assign a uniform
password to all SMA devices to be registered in a system. The installer password is also the
system password.
6. In the Repeat password field, enter the password again.
7. Click on Save and log in.
☑ The Configuring the Inverter page opens.
Log in as the User or Installer
1. In the drop-down list Language, select the desired language.
2. In the User group drop-down list, select the entry Installer or User.
3. Enter the password in the field Password.
4. Select Login.
☑ The start page of the user interface opens.
Log Out as the User or Installer
1. On the right-hand side of the menu bar, select the menu User Settings.
2. In the subsequent context menu, select [Logout].
☑ The login page of the user interface opens. The logout was successful.