Sunny Tripower Installation Manual
Table Of Contents
- 1 Information on this Document
- 2 Safety
- 3 Scope of Delivery
- 4 Product Description
- 5 Mounting
- 6 Electrical Connection
- 6.1 Safety during Electrical Connection
- 6.2 Overview of the Connection Area
- 6.3 Connecting Conduits to the Connection Unit
- 6.4 Connecting the Grounding Conductor
- 6.5 Connecting the PV Array to the Connection Unit 600-US
- 6.6 Connecting the PV Array to the Connection Unit 1000-US
- 6.7 Operating the Reverse Polarity Detection
- 6.8 Connecting the DC Output Cable for the Inverter to the Connection Unit
- 7 Commissioning
- 8 Disconnecting the Connection Unit from Voltage Sources
- 9 Troubleshooting
- 10 Decommissioning
- 11 Technical Data
- 12 Accessories
- 13 Contact
SMA America, LLC 4 Product Description
Installation Manual CU600-1000US-IA-en-10 15
4.2 Type Label
The type label clearly identifies the Connection Unit. The type label is located on the right-hand side
of the enclosure. You will find the following information on the type label:
• Device type (Item No.)
•Serial number (Serial No.)
• Date of manufacture,
• Device-specific characteristics
You will require the information on the type label to use the Connection Unit safely and when seeking
customer support from the SMA Service Line. The type label must be permanently attached to the
Connection Unit.
Symbols on the Type Label
Symbol Explanation
Danger to life due to high voltages
The product operates at high voltages. All work on the product must be
carried out by qualified persons only.
Risk of burns from hot surfaces
The product can get hot during operation. Avoid contact during operation.
Allow the product to cool down sufficiently before carrying out any work.
Wear personal protective equipment such as safety gloves.
Observe the documentation
Observe all documentation that is supplied with the product.
UL certification mark
UL1741 is the standard applied by Underwriters Laboratories to the
product to certify that it meets the requirements of the
National Electrical Code
®
, the Canadian Electrical Code
®
CSA C22.1
and IEEE-929-2000. IEEE 929-2000 provides recommendations
regarding the proper equipment and functionality necessary to ensure
compatible operation when power generation is connected to the utility
grid.