Sunny Tripower Installation Manual
Table Of Contents
- 1 Information on this Document
- 2 Safety
- 3 Scope of Delivery
- 4 Product Description
- 5 Mounting
- 6 Electrical Connection
- 6.1 Safety during Electrical Connection
- 6.2 Overview of the Connection Area
- 6.3 Connecting Conduits to the Connection Unit
- 6.4 Connecting the Grounding Conductor
- 6.5 Connecting the PV Array to the Connection Unit 600-US
- 6.6 Connecting the PV Array to the Connection Unit 1000-US
- 6.7 Operating the Reverse Polarity Detection
- 6.8 Connecting the DC Output Cable for the Inverter to the Connection Unit
- 7 Commissioning
- 8 Disconnecting the Connection Unit from Voltage Sources
- 9 Troubleshooting
- 10 Decommissioning
- 11 Technical Data
- 12 Accessories
- 13 Contact
11 Technical Data SMA America, LLC
48 CU600-1000US-IA-en-10 Installation Manual
11 Technical Data
DC Input
DC Output
Protective Devices
Torques
CU 600-US-10 CU 1000-US-10
Maximum number of incoming strings 8 8
Strings for INPUT A 4 4
Strings for INPUT B 4 4
Maximum input voltage 600 V 1,000 V
CU 600-US-10 CU 1000-US-10
Maximum number of outgoing strings 2 2
CU 600-US-10 CU 1000-US-10
DC reverse polarity detection Not available available
Overcurrent protection String fuses String fuses
CU 600-US-10 CU 1000-US-10
Fuse holder / terminals for connecting the DC
input cables
30 in-lb. (3.4 Nm) 15 in-lb. (1.7 Nm)
Terminals for connecting the DC output cables 51 in-lb. (5.8 Nm) 51 in-lb. (5.8 Nm)
Grounding terminals 51 in-lb. (5.8 Nm) 51 in-lb. (5.8 Nm)
Lid screws 35.4 in-lb. (4.0 Nm) 35.4 in-lb. (4.0 Nm)