Installation Instructions

Installing the Device SMA Solar Technology AG
12 SB11_12_17-IEN100132 Installation Guide
• The ambient temperature should be below 40 °C to ensure optimal operation.
• The Sunny Boy must be easy to remove from the mounting location at any time.
• Do not expose the Sunny Boy to direct sunlight, so as to avoid power reduction due to excessive
heating.
• In a living area, do not mount the unit on
plasterboard walls (or similar) in order to avoid
audible vibrations.
The Sunny Boy can make noises when in use which
can be regarded as a nuisance when installed in a
living area.
• Observe the minimum clearances to walls, other
inverters or objects as shown in the diagram in
order to guarantee sufficient heat dissipation and to
have enough space for removing the Electronic
Solar Switch.