User's Manual

7 | P a g e
Panasonic Battery Bracket
 Supports CGA-D54 style batteries
 Holds 2 batteries but will run on just one – Hot-Swap for
endless power
 Will run a AC7 for over 12 hours straight when using high-
capacity Panasonic batteries
 Also maintains a low profile when mounted snugly against
the back of the AC7
 Output Voltage: 7.4v
SmallHD AC7 Universal Battery Plate
 Enables lightning-fast one-handed battery changes
 Incredibly low profile and light weight
 Snaps in and only uses one screw to attach to the monitor
 Makes your monitor compatible with all current AC7
SmallHD battery brackets as well as some Anton Bauer
and Marshall plates. (Marshall plate requires extra wire
available on our website)
SmallHD Battery sleeve
 Ships free with your AC7 (Upon request only)
 Attaches to your Universal Battery Plate
 Holds your legacy SmallHD battery pack.
Attaching the Battery Plate
Your battery plate attaches by screws directly to the back of the
Universal battery adapter plate –The Sony, Canon 5D/7D and
Panasonic plates are attached at two points which are on the left
and right side of the adapter plate.
If you lose a thumbscrew – go to this webpage and you can
order more: http://www.smallhd.com/store/thumb-screw