Installation manual

www.smartavi.com

Introduction

CATSwitchPro routes audio, video, IR and RS/232 signals from several dierent video

sources out to multiple displays (projectors, monitors, etc.) and speakers via inexpensive

Cat5/6 UTP cable. It supports pass-through IR and RS-232 signals for remote control of

devices such as displays and switches.

CATSwitchPro is capable of connecting to as many as 16 video sources via transmitters

and 16 video displays via receivers with a maximum extension of 1,000 feet between the

transmitter and receiver units.

A single audio/video output can be routed to one or multiple destinations. Video is

transmitted at a resolution of 1920 x 1200 to insure high resolution images. Buered video

outputs and analog delivery of stereo audio maintains optimum integrity throughout

the system. Special remote boxes oer compatibility with Video Composite , UXGA,

Component Video and S-Video.

Features

• Supports high resolution video up to 1920x1200

• High quality audio switching

• Infrared, RS232 and TCP/IP control

• Pass-through IR and RS-232 for remote device control

• PC Windows software control

• Integral UTP distribution

• 1U rackmounted chassis

• Uses easy to install, inexpensive CAT-5/5e/6/7/8

• Maximum extension of 1,000 feet (500m) between the local and remote units

• HDTV compatible. (720p, 1080i,1080p)

• 300 MHz bandwidth

• Compatible with VGA, XGA, Sun, MAC and SGI

• Sync Format / Polarity Preservation

• Compatible with Line Level Stereo Audio Signals

• High ground loop immunity

• Built-in power surge and transient protection

• Designated trimmer in the remote unit to compensate for length

CATSwitch Rear