Installation manual

10
www.smartavi.com
Installation (continued)
SmartAVI Proprietary Connector
Pair Color RJ45 Pin Description
1
White/Orange 1
Video+Audio
Orange 2
2
White/Green 3
Video+Audio
Green 6
3
Blue 4
Video+Audio
White/Blue 5
4
White/Brown 7
DATA RS232 and IR
Bidirectional
Brown 8
CAT5 Preparation
The CATXPro is a point to point video extender/switcher. The system does not allow to connecting the Cat5 via hubs
or any kind of switches that the point to point connection need be maintained. The 16 RJ45 ports on the front of the
CATXPro are output ports, providing connectivity to the XTPro or XT-AV receiver. This is a standard RJ45 connector,
the CATXPro can be connected via either CAT5, CAT5e or CAT6 cabling.
CONNECTOR PAIR PINS
1 1 & 2
2 3 & 6
3 4 & 5
4 7 & 8
CAPACITANCE 14 pf/ft (46.2 pf/m)
CONDUCTOR GAUGE 24 AWG
IMPEDANCE 100 +/- 15 ohms
CAT5/5e/6 CABLE SPECIFICATIONS
RJ-45 MALE RJ-45 FEMALE
87654321
12345678
Connecting the Control Communication Cable: RS-232
Each unit can be controlled by a RS-232 port connected from the back of the chassis. The SmartControlPro software
will be used to control the units.
1. Connect the RS-232 cable the control computer by connecting the female RS-232 connector into the male RS-
232 connector of the PC. Turn the side screws so that it does not accidentally become disconnected
2. Connect RS-232 cable connector to the male RS-232 connector on the back of the chassis.