Installation manual

2
www.smartavi.com
Introduction
CATXPro routes audio, video, IR and RS/232 signals
from several dierent video sources out to multiple
displays (projectors, monitors, etc.) and speakers via
inexpensive Cat5/6 UTP cable.
CATXPro is capable of connecting to as many as 64
video sources via transmitters and 64 video displays
via receivers with a maximum extension of 1,000
feet between the transmitter and receiver units.
A single audio/video output can be routed to one
or multiple destinations. Video is transmitted at a
resolution of 1920 x 1200 to insure high resolution
images. Buered video outputs and analog delivery
of stereo audio maintains optimum integrity
throughout the system. Special remote boxes
oer compatibility with Video Composite , UXGA,
Component Video and S-Video.
Features
• Supports high resolution video up to 1920x1200
• High quality audio switching
• Infrared, RS232 and TCP/IP control
• PC Windows software control
• Integral UTP distribution
• 9U rackmounted chassis
• Uses easy to install, inexpensive CAT-5/5e/6/7/8
• Maximum extension of 1,000 feet (300m)
between the local and remote units
• HDTV compatible. (720p, 1080i,1080p)
• 300 MHz bandwidth
• Compatible with VGA, XGA, Sun, MAC and SGI
• Compatible with Line Level Stereo Audio Signals
• High ground loop immunity
• Built-in power surge and transient protection
• Designated trimmer in the remote unit to
compensate for length
CATXPro Rear