Installation manual

9
www.smartavi.com
Make sure the unit is powered o before connecting the cables
Connect all the Transmitters
1. Locate the RJ45 jacks on the back of the CATXPro,
2. Connect the CAT5 cable to the RJ45 and mark each cable with the number of
the transmitter
3. REPEAT steps for all transmitters cables
Connect all the Receivers
1. Locate the RJ45 jacks on the back of the CATXPro,
2. Connect the CAT5 cable to the RJ45 and mark each cable with the number of
the receivers
3. REPEAT steps for all receivers cables
After all connections are made, you can power on the CATXPro, the transmitters
and receivers.
Installation (continued)
WARNING: The CATXPro MUST have 1U of space above and
below for proper ventilation. Failure to do so may damage
the CATXPro due to over heating.