User manual

HARDWARE INSTALLATION
1. Turn off all the computers and displays.
2. Connect the male to male DVI cables from the computers to the DVI
input ports on the rear of the DVR16x16.
3. Connect the DVI displays to the output ports on the on the rear of the
DVR16x16.
4. Connect the power cord and power-on the DVR16X16.
5. Power on the computers and the displays.
CONTROLLING THE HDR8X8/HDR16X16
There are multiple ways to control the DVR: via the front panel, via the
SmartControlPro software, via RS-232 commands (using third-party soft-
ware such as AMX, Crestron), and with a TCP-IP module
USING NET-IP-PRO MODULE (TCP/IP CONTROL)
The NET-IP-PRO is an RS-232 control module that allows most SmartAVI
switching matrixes to be controlled remotely via HTTP or TELNET. Manage
the switching functions of your matrix with ease from anywhere in the
world. With NET-IP-PRO you can save input/output configuration presets
for easy access. TELNET access provides transparent command control of
your matrix, perfect for use with automated third-party control software.
For more information about the NET-IP-PRO, visit www.smartavi.com.