Installation manual
6
www.smartavi.com
Installation
1. Turn o all input devices and displays.
2. Connect the HDMI extension cables to the input devices and to the “IN” ports on the
HDR16X16.
3. Connect the displays to the “OUT” ports on the HDR16X16.
4. Connect the power cord and power-on the HDR16X16.
5. Power on the input devices and the displays.
Switching Between Ports
There are four ways to switch between inputs on the HDR16X16: via the front panel buttons,
IR remote control (optional), RS-232 connection, or TCP/IP (optional).
Front Panel Control
During normal operation, you will see a list of ports on the front panel display.
Main Menu
To assign an output to an input, press SWITCH. A blinking block cursor will appear. Use UP and
DOWN to select the input that you would like to assign. Once the cursor is over the desired
input port, press ENTER to enter editing mode. Press UP and DOWN to select the output port.
Once you have selected an output, press ENTER to save the conguration. To escape from
editing mode, press ESC.