Installation Guide

Preinstallation Requirements
Tools and materials needed for installation:
Adjustable
Wrench
1. Shut off the cold water supply.
2. Connect either end of the PEX water line to the water supply valve.
3. Connect the other end of the PEX connector directly to the ice maker inlet located
on the back of the refrigerator (See Page 3)
INSTALLATION INSTRUCTIONS
IMPORTANT
Do not overtighten.
Determine the Water Supply
Configuration
1. Shut Off Valve
2. PEX Supply Tubing
3. Copper Supply Tubing
1. Shut off the cold water supply.
2. Ensure that the PEX water supply tubing has a clean cut at the connection point.
Do not re-use any pre-
existing compression nuts or sleeves.
(Caution - do not cut the molded PEX waterline supplied with this kit.)
3. Take nut from end of compression union and place nut on PEX water supply tube.
4. Slide the supplied PEX compression sleeve onto the PEX water supply tube. Do not
use the brass compression sleeve with the PEX water line.
5. Place tubing squarely into body of compression union. Slide sleeve and nut into
position on threads and tighten. Remove nut and sleeve from other end of
compression union and discard.
6. Connect either end of the PEX water line to the other end of the compression
union.
7. Connect the other other end of the PEX water line directly to the ice maker inlet
located on the back of the refrigerator (See Page 3)
1. Shut off the cold water supply.
2. Ensure that the copper tubing has a clean cut at the connection point. Do not
re-use any pre-existing compression nuts or sleeves.
3. Take nut and sleeve from end of compression union and place nut first, then
sleeve, on copper water supply tube.
4. Place tubing squarely into body of compression union, slide sleeve and nut
into
position on threads and tighten.
5. Remove nut and sleeve from other end of compression union and discard.
6. Connect either end of the PEX water line to the other end of the compression
union.
7. Connect the other end of the PEX water line directly
to the ice maker inlet located on the back of the refrigerator (See Page 3)
WATER
SUPPLY VALVE
Pg. 2
PEX
WATER SUPPLY
COPPER
WATER SUPPLY
PEX COMPRESSION SLEEVE
BRASS COMPRESSION SLEEVE
(2) Installation Instructions for PEX Supply Line
Installation Instructions for Copper Supply Line
(1) Installation Instructions for Supply Shut Off Valve