User's Manual

Page 6/11
WARNING: The battery pack should be charged only with exclusive charger. The use of any
other charger may cause injury and permanent damage to the battery.
Do not charge the battery for longer than the specified time!
Do not place the battery pack into a microwave or high pressure container!
Keep ruptured and leaking battery packs away from fire!
Follow charging instructions provided with the charger.
Do not use an abnormal battery!
Do not use the transceiver while it is in the charger!
Keep the battery contacts clean.
Do not charge the battery when the ambient temperature is less than +50 degrees
Fahrenheit / +10 degrees Celsius or above +104 degrees Fahrenheit / +40 degrees Celsius.
USING THE BATTERY PACK
Charge the battery pack before using it.
To keep the battery discharge at a minimum, remove the battery pack from the transceiver
when it is not in use.
Store the battery pack in a cool place to maximize storage life. Since batteries are subject to
self discharge, avoid high storage temperatures; this will cause large self-discharge rates.
After extended storage, a full recharge is recommended.
INSTALLING / REMOVING THE BATTERY PACK
1. Turn of the power off.
2. Remove the battery pack from the transceiver;
Pull the battery lock button and slide down the battery pack.
3. To insert the battery pack, slide up the battery pack.
BATTERY LIFE INDICATOR
Battery life is indicated by the battery icon in the LCD. The transceiver must be recharged
when the low battery life indicator (battery empty mark) is still displayed.
The transceiver will be unavailable when the low battery life warning is displayed” No
Battery”.