Installation Instructions

3
Estimated Assembly Time: 15 minutes
Tools required for assembly (not included): (2) mounting screws or toggle bolts,
(2) butterfly nuts, (2) metal threaded hooks, drill, 1/4 in. drill bit, 1/16 in. drill bit,
eye protection, ladder, pliers, stud finder.
Helpful tools (not included): Combination wood/machine screws (for wood mounting)
Read all safety precautions and installation instructions carefully before installing or servicing this
fixture. Failure to comply with these instructions could result in potentially fatal electric shock and/or
property damage.
It is recommended that a qualified electrician perform all wiring. This fixture must be wired in accordance
with all national and local electrical codes.
WARNING: Do not handle any energized fixture or attempt to energize any fixture with wet hands or
while standing on a wet or damp surface or in water.
WARNING: To reduce the risk of electrical shock, and to assure proper operation, this fixture must
be adequately grounded. To accomplish proper grounding, there must be a separate ground wire (green)
contact between this fixture and the ground connection of your main power supply panel.
CAUTION: Make sure that the power source conforms to the requirements of the fixture (see labels on
fixture housing). This fixture is designed for use in a 110-120VAC, 60Hz
CAUTION: Make sure power is off at fuse or circuit breaker box. Check wires for damage or scrapes. If
power supply wires are within three inches of the LED driver power supply, use wire suitable for at least
90° C (194° F). NOT FOR USE WITH DIMMING CIRCUITS.
This fixture is intended to be used for general indoor lighting in dry or damp locations only.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Any modifications to this fixture may void the warranty and interfere with the safe operation of
the luminaire.
PREPARATION
Disconnect electrical power at fuse or circuit breaker box before installing or servicing any part of this
fixture. Carefully remove the fixture from the carton, and check that all parts are included.
If parts are missing or damaged, do not attempt to assemble the product. Contact customer service at
1-800-873-2326. Monday - Friday, 8:00 am-4:30 pm Central Standard Time for replacement parts.
SAFETY INFORMATION
CARE AND MAINTENANCE
Periodically, dust the diffuser (outside) with a clean, dry cloth. Wipe clean with a
slightly damp cloth as needed. Never use abrasive cleaners.