Installation Instructions

ManualsBrandsSmart Electrician ManualsIndoor Lighting1800 Lumens 24 x 5 LED Wrap Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 348-0032

348-0033

LED WRAP LIGHT

Model Number: V1506

V1509

Page 1 of 4

HARDWARE CONTENTS Note: Hardware not shown actual size.

Anchor

Dry Wall Screw

Wire Connector

Plastic Plug

PACKAGE CONTENTS

Summary of content (4 pages)

PAGE 1
Sku Number: 348-0032 348-0033 LED WRAP LIGHT Model Number: V1506 V1509 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A C BB HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (cove ring) during fixture installation. Do not permit wires to contact • any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 2 A Ceiling AA Outlet Box Anchor BB 2. Attach the fixture plate (A) to the location where you want to install, mark the target where is for two anchor (AA) to secure fixture plate (A) to the ceiling. Remove the fixture plate (A) and drill two holes on the target. Hammer the anchors (AA) to target holes tightly, and then secure the dry wall screws (BB) to anchors in part way. 3 Outlet Box Source Wire Wire Connector (C) Fixture Wire 3.
PAGE 4
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326. Spare Parts List: BB AA Anchor X2 Assembly Kit 5402MM (1 SET) CC Dry Wall Screw X2 DD Plastic Plug 5409PA Wire Connector X3 Plastic Lens 9745PL FOR 348-0032 9746PL FOR 348-0033 CARE AND MAINTENANCE Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.